Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterHeatShield Chimney Cap & Crown in Severna Park: What to Know First
We provide independent HeatShield chimney cap and crown service in Severna Park, with most repairs completed in a single visit and upfront pricing agreed before we start. A standard HeatShield cap replacement runs $340-$620, while crown coating or repair typically falls between $280-$550 depending on access and condition.
This page is for homeowners who already have a HeatShield system installed and need cap or crown work done correctly the first time. We’re not a HeatShield dealer, and we’re not affiliated with the manufacturer - we’re an independent HeatShield service provider with twenty years of hands-on experience with their products in Anne Arundel County. If your cap is rusting through, your crown is cracking, or you’re not sure which HeatShield series is on your roof, call us at (443) 464-2560. We’ll look at it, photograph it, and tell you what it needs.
How HeatShield Products Fail - and How We Fix Them
- HeatShield Cerfractory Foam liner systems with original equipment caps: The OEM cap on early Cerfractory installations was a lighter-gauge galvanized unit that corrodes faster than the liner itself, especially where the Magothy River’s salt air settles on Severna Park roofs. We see the cap flange rust completely through while the liner below is still sound. Our fix: remove the failed cap, inspect the liner top with a camera, and install a Gelco or Famco stainless cap sized to the HeatShield collar - better metal, proper fit, no interference with draft.
- HeatShield UL-Listed relining jobs with poured crown damage: The poured refractory crown that seals a HeatShield UL-Listed job can develop hairline cracks within seven to ten years in our freeze-thaw climate. Water gets in, freezes, widens the crack, and eventually undermines the liner seal. We grind out the damaged crown material, apply a bonded crown coat rated for liner systems, and reseal with a cap that sheds water away from the joint.
- HeatShield SmoothWall liners with aftermarket cap mismatches: Homeowners sometimes install a big-box cap that doesn’t match the SmoothWall termination, creating a gap where creosote drips onto the crown and eats the mortar. We remove the wrong cap, clean the creosote staining, and install a proper HeatShield-compatible termination with correct clearances.
- Multi-flue HeatShield installations with shared crowns: When two or three HeatShield liners terminate on one broad crown, the center often fails first from thermal cycling and standing water. We see this in the older Severna Park homes off Benfield Road where multiple fireplaces were relined in the 1990s. Our repair: sectional crown rebuilding with slope correction, then individual caps for each flue to isolate water exposure.
- HeatShield cap collars working loose from expansion: The stainless collar that joins a HeatShield cap to the liner can back out from thermal expansion cycles, especially on south-facing exposures. It looks intact from the ground but leaks water at the joint. We find this during camera inspection, reseat the collar with proper fasteners, and replace the cap if the threads are stripped.
Our HeatShield Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, 24 hours a day. We ask for your HeatShield series if you know it, but most homeowners don’t - that’s fine. We book a time that works and send a confirmation.
- 2
Level-2 camera inspection on arrival. Our technician photographs the cap, crown, and liner top from inside and out. You see the images on a tablet while we explain what we’re looking at. No guesswork, no “trust me.”
- 3
Parts decision: OEM-compatible or upgrade. For HeatShield systems, we stock Gelco and Famco stainless caps that fit HeatShield terminations precisely. If your warranty is still active and requires OEM, we’ll source it. Otherwise we typically recommend the upgrade - thicker metal, better screen, longer life in Severna Park’s coastal air.
- 4
Repair or replacement with upfront pricing. We agree on the exact number before starting. The estimate is the invoice. No surprises.
- 5
Post-repair function test and documentation. We run a draft test, verify cap clearance, and photograph the finished work. You get a report with photos and our plain-English verdict on overall system condition.
- 6
Cleanup, guarantee, and done. We haul away old material, leave the work area clean, and back everything with our 90-Day Done Right Promise in writing. If it’s not right, we make it right. No paperwork, no arguing.
What HeatShield Chimney Cap & Crown Costs in Severna Park
| Service | Typical Range | What Moves the Price |
|---|---|---|
| HeatShield cap replacement (single flue) | $340-$480 | Stainless vs. copper, flue diameter, roof access |
| HeatShield cap replacement (multi-flue) | $520-$620 | Number of flues, custom sizing, crown condition |
| Crown coating (minor cracking) | $280-$390 | Crack extent, need for primer, height of chimney |
| Crown rebuild / sectional repair | $450-$550 | Area damaged, liner seal integrity, formwork needed |
| Cap + crown combined repair | $620-$890 | Scope of each, parts chosen, access difficulty |
These are real 2024-2025 Severna Park prices for HeatShield systems, not national estimates. Steep pitches above 8/12, buried access behind dormers, or discovery of hidden liner damage can add labor. We tell you before we start, not after we finish. Estimates are free - call (443) 464-2560 for an exact quote on your chimney.
Why Severna Park Homeowners Call Hearthstone Chimney Co. for HeatShield Work
We’ve worked chimneys along the B&A Trail corridor for two decades, including the older wood-burning fireplaces that see heavy use every winter and the HeatShield relining jobs done in the 1990s and 2000s that are now due for cap and crown attention. Russell Haines started this company on the idea that a chimney sweep should tell you what he found, what it means, and what it costs - nothing more. “If the chimney is not safe to use, I will say so. If it is, I will say that too.”
Our 90-Day Done Right Promise means if the repair fails, we come back. In writing, no arguing. Our technicians are background-checked, uniformed, and trained on HeatShield, DuraFlex, and Gelco systems - not just generic cap installation. And when you call (443) 464-2560, a live person answers, every hour of every day. We’ve been here over 42 years. We plan to be here thirty more. That changes how you treat a customer.
FAQs
Using an independent service provider does not automatically void a HeatShield warranty, but warranty claims for the liner itself may require documentation that cap and crown work was done to manufacturer-compatible standards. We photograph everything, use proper parts, and provide detailed invoices you can submit if needed. Call (443) 464-2560 if you want us to review your warranty terms before booking.
We can source OEM HeatShield caps when warranty compliance requires them. For most Severna Park homeowners whose warranty period has passed, we recommend Gelco or Famco stainless caps - thicker gauge, better screen design, and longer service life in our coastal climate. We’ll explain both options and let you decide.
If the cap metal is rusted through, the mesh is clogged with creosote, or the collar is loose, the cap needs replacement. If the cap is sound but water is still getting in, the crown is likely cracked or improperly sloped. Our camera inspection shows you exactly which is which. Estimates are free - call (443) 464-2560.
Cracks under 1/8 inch with solid underlying structure can be coated successfully. Extensive spalling, exposed liner seal, or a crown that holds water instead of shedding it needs sectional rebuilding or full replacement. We don’t recommend work you don’t need, and we don’t patch what won’t last. You’ll see the photos and hear our honest recommendation.
Most jobs are completed in a single visit once scheduled. We stock common HeatShield-compatible cap sizes and crown coating materials. If your configuration is unusual, we may need one day to source parts. Call (443) 464-2560 - we’ll tell you exactly what your job requires and when we can do it.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Severna Park and nearby areas.