Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Severna Park: What to Know First
We provide independent Olympia Chimney chimney liner & rebuild in Severna Park, with most liner replacements and partial rebuilds completed in a single visit and priced upfront before any work begins. A typical stainless steel liner installation for an Olympia Chimney system runs $2,800-$4,500 depending on flue height and configuration, and we do not recommend work without camera evidence you can see for yourself. This page is for homeowners in Severna Park who own an Olympia Chimney liner, cap, or component and need honest guidance on whether to repair or replace it. Call (443) 464-2560 anytime - a live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 316Ti flexible liners in Severna Park’s salt-air environment. The titanium-stabilized 316Ti alloy resists acid corrosion well, but we’ve found the flex joints fatigue faster than expected in homes within a mile of the Magothy River or Chesapeake Bay, where salt-laden humidity accelerates crevice corrosion at the seam welds. We replace with a rigid or semi-rigid DuraFlex equivalent when the flue geometry allows, or source OEM Olympia 316Ti when the original winding pattern must be matched exactly.
- Olympia Gelco-compatible top-mount dampers with seized frames. The cast-aluminum frames on early-2000s Gelco dampers (often paired with Olympia liners in Severna Park builds from that era) seize after fifteen to twenty seasons of thermal cycling. The stainless cable snaps, the frame warps, and the damper becomes a lintel obstruction. We remove the assembly, inspect the Olympia liner throat for creosote impingement, and fit a new Gelco or Famco replacement with a stainless chain drive rather than cable.
- Olympia smooth-wall rigid liners with mortar fallout blockage. In the older Severna Park neighborhoods off Ritchie Highway - particularly the pre-1985 brick colonials - we’ve pulled out Olympia smooth-wall liners that were retrofit into unlined flues with inadequate clearance to combustibles. The liner itself is sound, but the annular space packed with loose mortar from a sloppy original install has collapsed, blocking the flue. We extract the liner, clear the debris, and reinstall with proper insulation and a listed support system.
- Olympia chimney caps with failed mesh spark arrestors. The 5/8-inch mesh on standard Olympia caps clogs with creosote flakes in heavy-burning Severna Park fireplaces, then corrodes through at the weld points. The cap still sheds water, but it’s no longer a spark arrestor and may violate local code. We replace with a Copperfield cap with 3/4-inch mesh and a removable lid for liner access, or an Olympia OEM cap if the homeowner prefers exact matching.
- HeatShield-compatible Olympia flues with degraded cerfractory coating. Some Severna Park homeowners had HeatShield cerfractory resurfacing applied over an Olympia liner as a “liner repair” by a previous contractor. When the coating delaminates - usually where the original liner had a hidden crack we couldn’t see - the flue is no longer listed. We camera-map the delamination, remove the failed coating, and either re-line with a new Olympia or DuraFlex stainless unit or apply a proper HeatShield ECS (Environmental Chimney System) rebuild if the substrate is salvageable.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers (443) 464-2560, any hour. We book a Level-2 camera inspection, not a sales visit.
- 2
Inspection and documentation. Our technician runs a camera the full length of your Olympia Chimney liner, photographs every joint, seam, and transition, and explains what we’re seeing on the screen in plain English. You get the photos and the verdict - no jargon, no pressure.
- 3
Parts decision. If the liner is failed, we specify OEM Olympia Chimney replacement parts when they’re the right fit, or a DuraFlex, HeatShield, Gelco, or Famco equivalent when geometry or budget makes aftermarket the smarter choice. We explain the trade-off and let you decide.
- 4
Repair or rebuild. For liner replacement, we pull the old unit, inspect the surround, install the new liner with proper insulation and support, and seal the top with a listed cap. For partial or full rebuilds, we lay brick or pour a crown to match existing coursing, using professional-grade materials throughout.
- 5
Testing and sign-off. We run a smoke test or draft test, verify clearances, and show you the final camera pass. The technician signs the work order; you get a copy with the 90-Day Done Right Promise in writing.
- 6
Cleanup and follow-up. We haul away debris, protect your floors and landscaping, and check in within thirty days to confirm everything is performing as expected.
What Olympia Chimney Chimney Liner & Rebuild Costs in Severna Park
These are real numbers for Severna Park homes we’ve worked on - not teaser rates that balloon on the invoice.
| Service | Typical Range |
|---|---|
| Olympia Chimney stainless steel liner replacement (standard flue, single appliance) | $2,800 - $4,500 |
| Olympia flexible liner replacement with insulation (tall or offset flue) | $3,200 - $5,200 |
| Partial chimney rebuild (above roofline, 4-6 courses + crown) | $2,200 - $3,800 |
| Full chimney rebuild (firebox to cap) | $8,500 - $14,000 |
| Olympia liner repair (seam weld, localized HeatShield ECS) | $850 - $1,600 |
| Cap/crown replacement with new spark arrestor | $650 - $1,400 |
What moves the price: flue height, number of appliance connections, accessibility (steep roof pitch, tight chase), and whether the original install left surprises we have to correct. We price it all upfront - the number on the estimate is the number on the invoice. Call (443) 464-2560 for a free, no-obligation estimate at your Severna Park home.
Why Severna Park Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been answering the phone with a live person for over 42 years, and we plan to be in Severna Park in thirty more. That changes how we treat every job. Our 90-Day Done Right Promise is in writing, no arguing - if it’s not right, we come back. Our technicians are background-checked, uniformed, and trained on Olympia Chimney specifics: the winding pitch of their flex liners, the torque spec on their compression fittings, the clearance requirements their literature assumes you already know. When Olympia parts are back-ordered, we have relationships with DuraFlex, HeatShield, Gelco, and Famco to keep your project moving. And we document everything - photos you can see, a plain-English verdict - because a homeowner who’s been burned before deserves to see the evidence, not just hear the recommendation.
Russell Haines puts it this way: “If the chimney is not safe to use, I will say so. If it is, I will say that too.” That’s the only way to run a business that outlasts the contractors who cut corners and disappear.
FAQs
No, proper repair by an independent service provider does not void your Olympia Chimney warranty, provided we use OEM or equivalent listed parts and follow installation instructions. As an independent Olympia Chimney service provider, we are not affiliated with the manufacturer, but we document our work to their specifications so any future warranty claim remains valid. Call (443) 464-2560 if you’d like us to review your warranty paperwork before we start.
Most Olympia Chimney liner replacements are completed in one day, with the technician arriving between 8 and 9 a.m. and finishing by late afternoon. Complex jobs - tall flues in Severna Park’s two-story colonials off Benfield Road, or liners with multiple appliance connections - may require a second day. We tell you before we start, not when we’re halfway through.
We repair Olympia liners when the damage is localized and the surrounding material is sound - a seam weld crack, a small area of corrosion, or a failed top plate. We recommend full replacement when the liner has multiple failure points, when the alloy has thinned below code minimum, or when a previous “repair” has compromised the listing. The camera inspection shows us which category you’re in, and we show you the footage before quoting either option.
OEM Olympia parts are the right choice when your flue geometry or appliance connection requires exact matching - their flex liners have a specific winding pitch that mates to their own collars and supports. DuraFlex and HeatShield equivalents often exceed OEM specifications for alloy grade or insulation value, and they may cost less or ship faster. We stock both, we explain the trade-off for your specific job, and we install whichever you choose with the same guarantee.
You need a full rebuild when the masonry structure itself is compromised - spalled brick, deteriorated mortar joints, a cracked or settled foundation, or a crown that has failed and allowed water into the wythes. You need liner repair or replacement when the masonry is sound but the flue pathway is unsafe. Our Level-2 camera inspection distinguishes the two, and we’ll tell you plainly which category you’re in. Severna Park’s freeze-thaw cycles and coastal humidity accelerate both problems, so we don’t guess - we look, we photograph, and we explain. Call (443) 464-2560 to schedule.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Severna Park and nearby areas.