Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Severna Park: What to Know First
We provide independent Olympia Chimney fireplace services in Severna Park, with most repairs completed in a single visit and upfront pricing agreed before we start. A typical gas fireplace service runs $180-$340, wood-burning fireplace repairs range $250-$850, and full insert troubleshooting with Level-2 camera inspection starts at $275. We do not quote over the phone for what we have not seen, and we do not sell work you do not need. If you own an Olympia Chimney gas fireplace, wood-burning unit, or insert in Severna Park and want it diagnosed by a technician who knows the product line, call (443) 464-2560. A live person answers, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- OLYM-36ST and OL-42 series gas inserts - pilot assembly carbon fouling. These units run a standing pilot that sits inches from the burner pan. After three to four seasons in Severna Park’s humid Chesapeake summers, the pilot orifice collects oxidation and the thermopile voltage drops below 325mV. The symptom is a pilot that lights but drops out when you release the knob, or a main burner that sputters. We clean the pilot with a proper orifice drill set, never a wire brush that enlarges the hole, and we test millivolt output before we leave. If the thermopile is weak, we source the correct Olympia-spec replacement rather than a universal fit that throws off the safety circuit timing.
- OLYM-TRAD wood-burning fireplaces - refractory panel cracking from thermal shock. The 36-inch and 42-inch traditional models shipped with medium-duty refractory panels that do not tolerate overfiring well. In Severna Park, we see this most in homes along the B&A Trail corridor where owners burn oak and hickory at high draft. A hairline crack under 1/8 inch can be monitored; anything wider or with spalling means replacement. We install HeatShield refractory replacement panels rated for the OLYM-TRAD firebox dimensions, or we rebuild with proper expansion joints if the damage has reached the steel wrapper.
- OLYM-DV direct-vent units - failed pressure switches from salt air corrosion. The pressure switch on these sealed-combustion units sits in the intake path. Severna Park’s proximity to the Chesapeake means higher chloride content in the air, and after five to six years the switch diaphragm stiffens or the hose cracks. The unit throws a three-flash error code or refuses to ignite. We test with a manometer, replace with an OEM-equivalent switch rated for marine environments, and verify the intake and exhaust terminations are sealed and sloped correctly so condensate does not pool.
- OLYM-INSERT wood inserts - bypass damper jamming from creosote glazing. The bypass damper on these older inserts (2008-2016 production) runs on a steel rod through a cast-iron ear. When owners burn unseasoned wood, creosote glazes the rod and the ear seizes. The handle moves half an inch and stops, or the damper will not seal in the closed position for startup. We disassemble the mechanism, media-blast the rod and ear, lubricate with high-temp graphite, and set the bypass gap to factory spec. If the ear is cracked, we weld and machine it or source a replacement casting through our Olympia parts channel.
- OLYM-GS gas log sets - burner pan rust-through from condensate trapping. The shallow burner pan on these sets collects condensate if the ember bed is packed too deep or if the silica sand layer is washed away. The pan rusts from underneath, the burner ports clog, and you get a lazy yellow flame instead of blue. We pull the set, inspect the pan with a borescope, and replace with a Gelco or OEM burner pan with proper drain weep holes. We also reset the ember bed depth so the problem does not repeat next season.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule. A live person answers, asks what you are seeing, and books a window. We do not give a repair price before we have looked.
- 2
Level-2 camera inspection and diagnosis. Our technician arrives uniformed and background-checked, sets down a drop cloth, and inspects the unit with a chimney camera and digital manometer where needed. You get photos you can see and a plain-English verdict.
- 3
Parts decision. If the repair needs a component, we explain OEM versus quality aftermarket options. For Olympia Chimney units, we stock common wear parts and source same-day for less common items. We never install a substitute that voids your remaining warranty coverage.
- 4
Repair with upfront pricing. We quote the full cost before starting. The number on the estimate is the number on the invoice. No surprises.
- 5
Testing and documentation. Gas units get a combustion analysis and spillage test. Wood units get a draft test and creosote assessment. We run the unit through a full heat cycle and show you the results.
- 6
Cleanup, guarantee, and written report. We haul away old parts, leave the work area as we found it, and hand you a written report with photos and the 90-Day Done Right Promise. If it is not right, we come back. In writing, no arguing.
What Olympia Chimney Fireplace Services Costs in Severna Park
These are the ranges we see most often for Olympia Chimney fireplace work in Severna Park homes:
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Gas fireplace tune-up and safety check | $180-$260 | Millivolt system condition, thermocouple vs. thermopile replacement, remote control pairing |
| Gas fireplace repair (pilot, burner, valve) | $250-$480 | Component location, OEM vs. aftermarket part, whether the gas line needs repositioning |
| Wood-burning firebox repair (refractory panels) | $340-$720 | Panel count, steel wrapper condition, whether heat shielding is required |
| Insert troubleshooting with Level-2 inspection | $275-$425 | Camera access difficulty, damper mechanism condition, liner compatibility check |
| Direct-vent pressure switch and termination service | $220-$390 | Switch location, intake/exhaust resealing, termination height and clearance |
We offer a $89 Seasonal Tune-Up for qualifying systems, $50 off any repair over $250, and a permanent 5% Senior and Veteran discount. Estimates are free. Call (443) 464-2560 for an exact quote on your Olympia Chimney unit.
Why Severna Park Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We are not a price-cutting chain, and we are not a one-truck operator who may answer the phone next year. We have served this area for over 42 years, and we plan to be here in thirty more. That changes how we treat every job.
Our technicians are background-checked, uniformed, and trained on Olympia Chimney’s product line alongside DuraFlex, HeatShield, and Gelco systems. When an Olympia part is backordered, we know which aftermarket alternatives meet spec and which ones do not. When a firebox repair calls for refractory work, we have the materials in stock.
Every inspection ends with photos you can see and a plain-English verdict. Nothing is recommended without camera evidence. If the work can safely wait, we say so. As Russell Haines puts it: “If the chimney is not safe to use, I will say so. If it is, I will say that too.”
The 90-Day Done Right Promise governs everything we do: Krafted right, Every time, Your home first, Standing behind it. In writing, no arguing.
FAQs
No, provided the repair uses correct parts and follows manufacturer specifications. As an independent Olympia Chimney service provider, we document every component by part number and keep photos of the installation. If a warranty claim arises, you have the paper trail. We do not install off-spec substitutes that could give Olympia grounds to deny coverage. Call (443) 464-2560 if you want us to review your warranty status before booking.
Common wear parts - thermopiles, pilot assemblies, pressure switches - are in our Severna Park warehouse or available same-day from our distributor. Older OLYM-INSERT castings and discontinued refractory panels may take three to five business days. We stock quality aftermarket alternatives from Gelco and HeatShield for situations where OEM is backordered, and we will tell you which path makes sense before we start.
Replace when the steel firebox wrapper is rusted through, the refractory system has failed in multiple panels, or the cost of repair exceeds 60% of a new insert installed. Repair when the issue is isolated to a component, the liner is sound, and the unit heats your space efficiently. We give you the numbers both ways and let you decide. Our Free Second Opinion on any written estimate means you can check our math against another quote.
Every year, before the first fire of the season. Gas fireplaces do not produce creosote, but the pilot orifice, burner ports, and venting system still degrade. In Severna Park’s salt-air environment, we see corrosion on direct-vent terminations accelerate after the five-year mark. Annual service catches it before the unit fails on the coldest night of January.
Wood-burning units accumulate creosote, which can ignite and cause a chimney fire. Gas units can develop combustion or venting problems that produce carbon monoxide. Both risks are real and preventable. That said, we do not scare-sell. We inspect, we show you what we found, and we tell you whether the hazard is immediate or something to address next season. Call (443) 464-2560 for a free estimate - we will give you the straight answer.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Severna Park and nearby areas.